Shandong Jiugang Tisco Steel Co., Ltd.
Stainless sword and aluminum are two of the most popular essence used for manufacturing. Extensively used for their versatility and erosion resistance, aluminum, and pristine sword are masses in the essence assiduity. To know when it’s better to use aluminum vs pristine sword, we must compare factors like their compositions, mechanical parcels, and cost.
Main Characteristics of Stainless-Steel vs Aluminum
Stainless Steel
- Contains a minimum of 11% chromium
- Is a ferrous alloy (contains iron)
- Usually magnetic
- High tensile strength
Stainless steel comes in a variety of grades. The grades are classified by a series number and assigned a numerical grade. The numbers classify the grades of steel based on their composition, physical properties, and applications. The most popular grades are 304 stainless steel and 316 stainless steel.
Aluminum
- Non-magnetic
- Low density
- Non-ferrous alloy (doesn’t contain iron)
Due to its low tensile strength, aluminum is commonly alloyed with other metals to give it a number of different superior properties. Some of the most common aluminum alloys are 3003 aluminum and 3004 aluminum.
Aluminum vs Stainless Steel: Which One Do I Use?
Both metals possess properties that are desirable for manufacturing a variety of products. However, the differences in their properties are a key factor when choosing which metal to use.
The Major Advantages of Each Metal
| Aluminum | Stainless Steel |
|---|---|
| -Good Malleability | -High Tensile Strength |
| -High Ductility | -Heat Resistant |
| -Good Conductivity | -Very Durable |
| -Light Weight | -Low Maintenance |
Aluminum vs Stainless Steel: Key Differences
Strength
Stainless steel is heavier and stronger than aluminum. In fact, aluminum is around 1/3 the weight of steel. Even though stainless steel is stronger, aluminum has a much better strength-to-weight ratio than stainless steel.
Conductivity
Steel is a poor conductor of electricity due to its dense protective oxide layer. On the other hand, aluminum is a very good electrical and thermal conductor.
Cost
Aluminum is more costly than stainless steel if you look at the price based on weight. But, if you look at price by volume, Aluminum is more cost-effective because you get more product.
Heat Resistance
When comparing stainless steel vs aluminum, stainless steel has much better resistance to heat with a melting point of 2500 ℉, while aluminum becomes very soft around 400 ℉ with a melting point of 1220 ℉. However, aluminum has the advantage over steel in cold temperatures. As the temperature decreases, the tensile strength of aluminum increases, while steel becomes brittle in low temperatures.
Corrosion Resistance
Aluminum does not rust; however, it does corrode when exposed to salt. Stainless steel is highly corrosion-resistant and does not easily rust. In addition, stainless steel is non-porous which gives it more resistance to corrosion.
Composition
Composition of Major Stainless Steel Alloys
| Alloy Grades | %C | %Mn | %P | %S | %Si | %Cr | %Ni | %Mo |
|---|---|---|---|---|---|---|---|---|
| SS304 | 0.040 | 1.580 | 0.024 | 0.040 | 0.400 | 18.35 | 8.040 | 0.070 |
| SS304L | 0.010 | 1.638 | 0.023 | 0.002 | 0.412 | 18.56 | 8.138 | 0.364 |
| SS316 | 0.080 | 2.000 | 0.045 | 0.030 | 1.000 | 16.80 | 11.20 | 2.500 |
| SS316L | 0.020 | 1.390 | 0.024 | 0.080 | 0.480 | 16.80 | 10.22 | 2.080 |
Composition of Major Aluminum Alloys
| Alloy | %Cu | %Mg | %Mn | %Si | %Zn |
|---|---|---|---|---|---|
| 2024 | 4.4 | 1.5 | 0.6 | 0 | 0 |
| 6061 | 0 | 1 | 0 | 0.6 | 0 |
| 7005 | 0 | 1.4 | 0 | 0 | 4.5 |
| 7075 | 1.6 | 2.5 | 0 | 0 | 5.6 |
| 356.0 | 0 | 0.3 | 0 | 7 | 0 |
Environmental Impact, Recyclability
Stainless steel is known for its good recyclability. According to Napa Recycling, steel is the most recycled material in the world. It has distinct magnetic properties that make it an easy material to recover from the waste stream for recycling. In addition, the properties of steel remain unchanged no matter how many times the steel is recycled.
Even though steel is the most recycled material, aluminum is the most recyclable of all materials. As a matter of fact, discarded aluminum is more valuable than any other material in your recycling bin. Nearly 75% of all aluminum produced in the U.S. is still in use today because aluminum can be recycled over and over again in a true closed loop. To learn more about recycling aluminum, visit the Aluminum Association.
Different Applications of Aluminum vs Steel
Aluminum and steel are everywhere. If you look around at any given place, chances are you will see something containing one of these metals. Below are some common applications of stainless steel and aluminum.
Aluminum Applications
Aluminum is common in the transportation industry because it is lightweight and corrosion resistant
- Automotive
- Train rails
- Airplanes
- Spaceships
- Long-distance power lines
Aluminum is common in the electrical industry because of its conductivity, ductility, and low density.Aluminum is used in architecture for its malleability, high strength-to-weight ratio, and cost efficiency
- Window frames
- High-rise buildings (fun fact: the Empire State Building was one of the first structures to contain aluminum)
Aluminum is common in household appliances because of its thermal conductivity
- Dishwashers
- Washers
- Dryers
- Refrigerators
Stainless Steel Applications
Stainless steel is common in kitchen equipment due to its resistance to corrosion and heat
- Kitchen sinks
- Cutlery
- Food prep tables
You’ll find stainless steel in surgical tools and medical equipment due to its corrosion resistance
- Forceps
- Surgical implants
- Scissors
Stainless steel is also used in architecture because of its strength and durability, just in different applications
- Bridges
- Monuments and sculptures
- Buildings
Stainless steel is also used in the automotive industry due to its strength and heat resistance
- Auto bodies
- Rail cars
- Engines
Conclusion
When comparing stainless steel vs aluminum, you see they both possess characteristics that make them popular materials for manufacturing. Knowing the differences between them helps you to know when to use aluminum vs stainless steel. For example, aluminum is used for electrical applications because it is conductive and lightweight while stainless steel is not. On the other hand, stainless steel is utilized for things like engines and processing equipment because of its strength, resistance to heat, and corrosion.
Contact Us
Contact Us
We offer our customers the opportunity to increase profitability by meeting their just-in-time production schedules and offering customized services to meet end-user-specific requirements. Posco Group has always been committed to improving customer service and product quality and providing high-value solutions for customers’ businesses. Satisfying the needs of customers is our daily work goal!