Shandong Jiugang Tisco Steel Co., Ltd.
- Standards: ASTM B209, JIS H4000-2006, GB/T 3190-2008, GB/T 3880-2006 etc
- Grade: 1050, 1060, 1070, 1100, 2024(2A12), LY12, 2A11, 3A21, 3003, 3103, 4A03, 4A11, 4032, 5052, 5083, 6063, 6061, 7075, 7050, etc
- Thickness: 0.2-300mm or customized as required
- Width: 10-3500mm or customized as required
- Length: 2000mm, 2440mm, 6000mm or customized as required
- Temper: O, T1, T2, T3, T4, H12, H14, H26, H112, etc
Aluminum 2024 alloy has good machinability and good mechanical properties. As a light alloy, Aluminum 2024 is an ideal design choice for a multitude of applications.
Aluminum 2024 Applications: Aluminum 2024 is typically used in aircraft structures, rivets, connectors, hydraulic valve bodies and miscellaneous structural applications.
Aluminum 2024 Specifications: UNS A92024, Aluminum 2024, 2024 Alloy, 2024 Aluminum Alloy, AA2024
Aluminum 2024 Available Forms: 2024 Aluminum Sheet, 2024 Aluminum Plate, 2024 Aluminum Bar
2024 Aluminum Sheet, 2024 Aluminum Plate
Temper: 2024-0, 2024-T3, 2024-T81, 2024-T351, 2024-T851
Bare: QQ-A-250/4, AMS 4035, AMS 4037, FMS 10101
Clad: QQ-A-250/5, AMS 4040, AMS 4041, BMS 7-305
2024-0 Bare Aluminum Sheet Per AMS-QQ-A-250/4
2024-0 Alclad Aluminum Sheet Per AMS 4035, AMS-QQ-A-250/5
2024-T3 Bare Aluminum Sheet Per AMS-QQ-A-250/4
2024-T3 Alclad Aluminum Sheet Per AMS-QQ-A250/5
2024-T3 Alclad MRS Quality Aluminum Sheet Per QQ-A-250/5
2024-T351 Aluminum Plate per AMS-QQ-A250/4
Mill: Alcoa, Kaiser, Alcan
Mechanical Properties
| Hardness, Brinell | 47 | 47 | AA; Typical; 500 g load; 10 mm ball |
| Ultimate Tensile Strength | 186 MPa | 27000 psi | AA; Typical |
| Tensile Yield Strength | 75.8 MPa | 11000 psi | AA; Typical |
| Elongation at Break | 20 % | 20 % | AA; Typical; 1/16 in. (1.6 mm) Thickness |
| Elongation at Break | 22 % | 22 % | AA; Typical; 1/2 in. (12.7 mm) Diameter |
| Modulus of Elasticity | 73.1 GPa | 10600 ksi | AA; Typical; Average of tension and compression. Compression modulus is about 2% greater than tensile modulus. |
| Ultimate Bearing Strength | 345 MPa | 50000 psi | Edge distance/pin diameter = 2.0 |
| Bearing Yield Strength | 131 MPa | 19000 psi | Edge distance/pin diameter = 2.0 |
| Poisson’s Ratio | 0.33 | 0.33 | |
| Fatigue Strength | 89.6 MPa | 13000 psi | AA; 500,000,000 cycles completely reversed stress; RR Moore machine/specimen |
| Machinability | 30 % | 30 % | 0-100 Scale of Aluminum Alloys |
| Shear Modulus | 28 GPa | 4060 ksi | |
| Shear Strength | 124 MPa | 18000 psi | AA; Typica |
Electrical Properties
| Electrical Resistivity | 3.49e-006 ohm-cm | 3.49e-006 ohm-cm | AA; Typical at 68 Degrees F |
Thermal Properties
| CTE, linear 68 Degrees F | 23.2 µm/m- Degrees C | 12.9 µin/in- Degrees F | AA; Typical; Average over 68-212 Degrees F range. |
| CTE, linear 250 Degrees C | 24.7 µm/m- Degrees C | 13.7 µin/in- Degrees F | Average over the range 20-300 Degrees C |
| Heat Capacity | 0.875 J/g- Degrees C | 0.209 BTU/lb- Degrees F | |
| Thermal Conductivity | 193 W/m-K | 1340 BTU-in/hr-ft²- Degrees F | AA; Typical at 77 Degrees F |
| Melting Point | 502 – 638 Degrees C | 935 – 1180 Degrees F | AA; Typical range based on typical composition for wrought products 1/4 inch thickness or greater. Eutectic melting is not eliminated by homogenization. |
| Solidus | 502 Degrees C | 935 Degrees F | AA; Typical |
| Liquidus | 638 Degrees C | 1180 Degrees F | AA; Typical |
Temper: 2024-0, 2024-T351, 2024-T3511, 2024-T851, 2024-T8511
Specification: QQ-A-225/6, QQ-A-200/4, AMS 4330, AMS 4120
2024-T4 Cold Finish Bar Per QQ-A-225/6, AMS-QQ-A-225/6, ASTM-B-211
2024-T351 Cold Finish Bar Per QQ-A-225/6, AMS-QQ-A-225/6, ASTM-B-211, AMS 4120
2024-T851 Cold Finish Bar Per QQ-A-225/6, AMS-QQ-A-225/6, ASTM-B-211, AMS 4339
2024-T3 Extruded Bar Per QQ-A-200/3, AMS-QQ-A-225/3, ASTM-B-211, AMS 4152
2024-T3511 Extruded Bar Per QQ-A-200/3, AMS-QQ-A-200/3, ASTM-B-211, AMS 4165
2024 Aluminum Tube
2024 aluminum tubing is heavily utilized in aircraft applications due to good machining characteristics and higher strength than either 2014 or 2017. Cold formability is considered fair, yet it is one of the most popular alloys for high strength tubing requirements because of the superior grain structure that can be obtained.
2024-T3 Aluminum Tube Per WW-T-700/3
1″ OD X 0.095″ Wall x 12 FT Per WW-T700/3
Product Inventory
Packaging And Shipping
Our Service
JiuGang Tisco Steel offers a wide range of advanced and standard tinplate machining services for tinplate products. We specialize in customized machining services to meet your most challenging tinplate needs.
The tinplate services we can provide include turning, milling, planing, drilling, boring, grinding, gear cutting, and CNC machining services. Of course, we can offer deformation processing services such as bending, cutting, rolling, and stamping.
Why choose us?
JiuGang Tisco Steel has developed a quality control system to ensure that we provide our customers with the highest quality tinplate materials that meet all their specifications. Our Quality Assurance Policy has established guidelines for providing products and services that exceed customer expectations. We are an ISO 9001-2015 certified company. Our management team and all of our employees are committed to constantly improving our service and our quality system.
Contact Us
We offer our customers the opportunity to increase profitability by meeting their just-in-time production schedules and offering customized services to meet end-user-specific requirements. JG.tisco Steel has always been committed to improving customer service and product quality and providing high-value solutions for customers’ businesses. Satisfying the needs of customers is our daily work goal!
