Shandong Jiugang Tisco Steel Co., Ltd.
En raison des différentes utilisations de chaque produit, the processing technology and quality requirements of raw materials are also different. Generally speaking, different acier inoxydable products require different thickness tolerances of raw materials, such as second-class tableware and thermos cups, etc., the thickness tolerance is generally higher, which is -3~5%, and the thickness tolerance of first-class tableware generally requires – 5%, steel pipes require -10%, hotel freezer material thickness tolerance requirements are -8%, dealers generally require thickness tolerances between -4% et 6%. En même temps, the difference in domestic and foreign sales of products will also lead to different requirements of customers on the tolerance of raw material thickness. En général, export product customers have higher thickness tolerance requirements, while domestic sales companies have relatively lower thickness tolerance requirements (mostly due to cost considerations), and some customers even require -15%.
① DDQ (deep drawing quality) material: refers to the material used for deep drawing (punching), that is, the so-called soft material. The main characteristics of this material are high elongation (≧53%) and relatively high hardness. Low (≦170%), the internal grain grade is between 7.0 et 8.0, and the deep drawing performance is excellent. Many enterprises that produce vacuum flasks and pans generally have relatively high processing ratios (BLANKING SIZE/product diameter), and their processing ratios reach 3.0, 1.96, 2.13, et 1.98 respectively. SUS304DDQ materials are mainly used for products that require a higher processing ratio. Bien sûr, products with a processing ratio exceeding 2.0 generally need to be stretched several times to complete. If the raw material extension cannot be achieved, the product is prone to cracks and pull-through phenomena when processing deep-drawn products, which will affect the qualified rate of finished products, and of course increase the cost of the manufacturer;
②General material: mainly used for materials other than DDQ. This material is characterized by relatively low elongation (≧45%), relatively high hardness (≦180HB), and internal grain size grades of 8.0~9.0 Compared with DDQ materials, its deep drawing performance is relatively poor. It is mainly used for products that can be obtained without stretching, such as spoons, spoons, forks, electrical appliances, and steel pipes for tableware. But it has an advantage compared with DDQ material, that is, the BQ property is relatively better, which is mainly due to its slightly higher hardness.
Acier inoxydable sheet is an inexpensive material, but customers have very high requirements on its surface quality. In the production process of stainless steel sheet, there will inevitably be various defects, such as scratches, pits, sand holes, dark lines, creases, pollution, etc., so its surface quality, such as scratches, creases, etc.. It is not allowed to appear, and defects such as pitting and sand holes are never allowed in the production of spoons, spoons, forks, because it is difficult to throw them away when polishing. It is necessary to determine the surface quality level according to the degree and frequency of various defects on the surface, so as to determine the product level.
L'acier inoxydable est souvent divisé en acier martensitique, acier ferritique, acier austénitique, austénitique-ferritique (duplex) stainless steel and precipitation hardening stainless steel according to the organizational state. En outre, it can be divided into: chromium stainless steel, chromium-nickel stainless steel and chromium manganese nitrogen stainless steel. There is also special stainless steel for pressure vessels “GB24511_2009_Stainless steel plates and strips for pressure equipment”.
Shandong Jiugang Tisco Steel Co., Ltd. est situé dans la belle ville de printemps -Jinan ,la capitale de la province du Shandong. Capital social de notre société au-delà du RMB 50 million. Nous sommes une société globale du groupe intégrant R&D, production, vente et service de produits sidérurgiques.
Si vous êtes intéressé par l'acier inoxydable ou l'acier au carbone,Contactez nous s'il vous plait. Tél: +86-13375310907 E-mail: Jgtisco@gmail.com
